192.168.101.1

192.168.101.1 is a private IP address used as the default gateway to access router admin settings at http://192.168.101.1. This IP address is commonly used by select router brands including some TP-Link models, certain generic routers, and regional ISP-provided modems. Through the admin panel, you can change WiFi password, network name (SSID), and configure other router settings.

How to login to 192.168.101.1?

  1. Connect your device to the router via WiFi or Ethernet cable.
  2. Open a web browser and type 192.168.101.1 in the address bar.192.168.101.1
  3. Press Enter to navigate to the router login page.
  4. Enter the default username and password when prompted.
  5. Click Login or Sign In to access the admin interface.

Note: The router IP address, username, and password are typically printed on a sticker on the back or bottom of your router. Make sure you’re connected to your router’s network before attempting to access the admin panel.

How to change WiFi Password and Network Name?

  • Log in to the router’s admin panel using 192.168.101.1
  • Navigate to Wireless Settings, WiFi Settings, or WLAN Configuration
  • To change Network Name (SSID):
    • Locate the “Network Name” or “SSID” field
    • Enter your preferred WiFi network name
    • Avoid using personal information in your network name
  • To change WiFi Password:
    • Find the “Password,” “Passphrase,” or “Pre-Shared Key” field
    • Enter a strong password (8+ characters with mixed letters, numbers, symbols)
    • Ensure WPA2 or WPA3 security is selected
  • Click Save, Apply, or Submit to confirm changes
  • Wait for the router to reboot and apply new settings

If you have a dual-band router, you may need to configure both 2.4 GHz and 5 GHz networks separately.

Can’t connect to 192.168.101.1 IP address?

  • Verify that your device is connected to the router’s network via WiFi or Ethernet cable.
  • Check if 192.168.101.1 is actually your router’s IP address. Try these common alternatives:
  • Clear your browser cache and cookies, then try again.
  • Try accessing the router using a different web browser (Chrome, Firefox, Safari, Edge).
  • Disable VPN connections if active, as they may interfere with local network access.
  • Restart your router by unplugging it for 30 seconds, then plugging it back in.
  • If all else fails, perform a factory reset by pressing and holding the Reset button on your router for 10-15 seconds until the LED lights flash.

Router brands and models vary in their default IP addresses. Always check your router’s documentation or label for the correct gateway address and login information.